Sold Out
With the addition of the Twin Track the MITU PRO BAMBOO FOIL is a fantastic 2 in 1 board. Take advantage of Mitu’s impressive experience to enjoy the best wave session on one day. Mount any foil with a top plate on the next day and cruise around the bay on a foil. In addition to the standard inline inserts, the MITU PRO BAMBOO FOIL also features some deck inserts in the ideal location for a V dual strap setup at the front to get the most out of your foiling.
The introduction of this construction has marked a major change into the F-ONE surfboard range and especially on our three key products.
To face the ever higher constrains applied by the riders on their surfkites F-ONE has engineered a new foam composite construction with optimized flex for maximum reliability, comfort and manoeuvrability. The mechanical characteristics achieved by this construction provide a lighter weight and a perfect surfboard feel.
The deck has been recessed by 5 mm on a wide area underneath the front foot in order to add an EVA shock absorbing foam layer.
This foam layer absorbs effectively all impacts for the riders and makes the board even more durable.
The twin track system with lateral spacing of 90mm is becoming an industry standard.
This system is compatible with all foils featuring a top plate with 4 fastening bolts. The length of the tracks enables some room to adjust the position of the foil on the board to reach everyone’s prefered balance.
As the strapless discipline develops and grows, so does the demands it puts on the boards.
With higher jumps and tougher landings, the stresses applied to the boards have migrated towards the rails and we have reinforced some of our constructions with lateral deck stringers to make the boards more robust in these areas. These stringers are not full depth to keep the flex and feel of the board.
RTM technology stands for RESIN TRANSFER MOLDING.
This process uses a closed mold to produce accurate composite parts.
The resin is injected in the mold after it is closed, with the dry fiber having been placed inside beforehand. The closed mold injection allows for great shape accuracy and the epoxy resin used make the fins stronger and more responsive providing a sharper feel on the water.
